About the Global Saving-Energy Lamp
The Global Saving-Energy Lamp is part of the ELEHPD Energy-saving Lamp range. Type Rated Voltage(V) Frequency(Hz) Rated Power(W) Luminous Flux (Lm) Color Temperature (K) Life-soan(H) Base Tube Diameter(mm) L(mm) L1(mm) A(mm) C(mm) B901 100-130 220-240 50/60 9W 11W 360 440 2700 3200 4500 5000 6400 7000 10000 E26 E27 B22 9 Screw 9 3U 124 63 50 63 Type Rated Voltage(V) Frequency(Hz) Rated Power(W) Luminous Flux (Lm) Color Temperature(K) Life-soan(H) Base Tube Diameter(mm) L(mm) L1(mm) A(mm) C(mm) B902 100-130 220-240 50/60 3W 5W 7W 9 108 180 252 324 2700 3200 4500 5000 6400 7000 10000 E26 E27 B22 E14 9 2U 138 55 41 43 ELEHPD manufactures and exports low voltage electrical products from Yueqing, Zhejiang, China, supplying distributors, panel builders, M&E contractors and OEM buyers worldwide.
Typical applications
- Commercial interiors: offices, retail, showrooms and hospitality
- Industrial high-bay lighting for warehouses and workshops
- Outdoor area, street and roadway lighting
- Warehouse, logistics and cold-store facilities
- Project lighting specified through M&E contractors
How to specify the right Energy-saving Lamp
- Work from the required lux level at the task plane, then the mounting height
- Match beam angle to the space: narrow for high ceilings, wide for low uniform coverage
- Check the IP and IK rating for the installation environment
- Confirm colour temperature and CRI with the interior designer or specifier
Frequently asked questions about the Global Saving-Energy Lamp
What colour temperature should I specify?
4000 K neutral white is the safe general choice for industrial and commercial interiors. 3000 K suits hospitality and retail where a warmer look is wanted. 5000-6500 K is common for outdoor and roadway lighting.
What IP rating do I need for outdoor use?
IP65 is the practical minimum for exposed outdoor fixtures. For wash-down or coastal locations, specify IP66 with a corrosion-resistant housing and confirm the IK impact rating.
Can the fixtures be dimmed or sensor-controlled?
Dimming and sensor variants depend on the driver fitted to the model. Tell us the control protocol you use (0-10 V, DALI, triac) and we will confirm compatible models.
Do you supply photometric data for lighting design?
IES/LDT photometric files can be supplied for project models so your designer can run the lighting calculation in DIALux or Relux.
Related Energy-saving Lamp models
Further reading
