JD86S Counter

About the JD86S Counter

The JD86S Counter is part of the ELEHPD Counter range. JD86S Counter from the ELEHPD Counter range. ELEHPD manufactures and exports low voltage electrical products from Yueqing, Zhejiang, China, supplying distributors, panel builders, M&E contractors and OEM buyers worldwide.

Typical applications

Consumer units and distribution boards in residential buildings
Commercial and retail fit-outs where selective protection is required
Industrial control panels and machine-builder assemblies
Solar PV, EV charger and battery-storage sub-circuits
OEM equipment where a DIN-rail protective device is specified

How to specify the right Counter

Match the rated current to the circuit design current, then check the cable ampacity
Pick the trip curve to the load: B for resistive/lighting, C for general mixed loads, D for motors and transformers
Confirm the breaking capacity meets the prospective short-circuit current at the point of installation
Verify the pole configuration (1P, 1P+N, 2P, 3P, 3P+N, 4P) against the system earthing arrangement

Specifications

JD862 SERIES COUNTER

◆ Main products: JD862(T)、JD862-4、JD862(B)、JD862A、JD862(K)、JD862(X) etc. Used for single-phase and three-phase meters.

◆ Product features: generally-structure design; complete transmission ratio; position of worm and worm gear can be adjusted when fixing.
Especially for type JD862(K), its friction moment and errors are both superior to covering international standard.

◆ Popular transmission ratio:

For single-phase	720series(rup)	720	1200	1440	1800	2400	3600	…
600series(rup)	600	1000	1200	1500	2000	3000	…
For three-phase	300(rup)	400	500	600	1000	2000	4500	…

◆ Mechanical burden:
Less than 1.0% on the basis of 220V,COSΦ=1.0 and 0.05I_b according to enterprise standard. This following chart shows the mechanical burden error tested by DD862(K) 5A 720rup register.

Frequently asked questions about the JD86S Counter

What is the difference between an MCB and an MCCB?

An MCB (miniature circuit breaker) is a DIN-rail device for final circuits, typically rated up to 125 A with a fixed trip curve. An MCCB (moulded case circuit breaker) is a larger device for main and sub-main distribution, usually 16 A to 1600 A, with adjustable thermal and magnetic settings and a higher breaking capacity. Use an MCB for branch circuits and an MCCB where you need adjustability or higher fault ratings.

How do I choose between a Type B, C and D trip curve?

Type B trips between 3 and 5 times rated current and suits resistive loads such as lighting and heaters. Type C trips between 5 and 10 times and is the general-purpose choice for socket circuits and mixed loads. Type D trips between 10 and 20 times and is used for loads with high inrush, such as motors, transformers and large LED drivers.

What does 6 kA breaking capacity mean in practice?

It is the maximum prospective short-circuit current the device can safely interrupt. 6 kA covers most domestic and light commercial installations. Where the transformer is close and the fault level is higher, specify 10 kA devices so the breaker still clears the fault without damage.

Can these devices be supplied with your own brand?

Yes. OEM branding, buyer-specific labels, custom carton print and private-model numbering can be arranged on qualified order volumes.