About the CL11 Lamp Capacitor
The CL11 Lamp Capacitor is part of the ELEHPD Capacitor range. CL11 Lamp Capacitor - Capacitor in ELEHPD Electrical Items range. Contact us for specifications and pricing. ELEHPD manufactures and exports low voltage electrical products from Yueqing, Zhejiang, China, supplying distributors, panel builders, M&E contractors and OEM buyers worldwide.
Typical applications
- Industrial control panels and PLC power rails
- LED drivers, signage and display power
- Battery charging and DC backup systems
- Motor drives, welding sets and rectifier assemblies
- Instrumentation and test equipment
How to specify the right Capacitor
- Size the output current with at least 20-30 % headroom over the load
- Check the input range covers the local supply, including brown-outs
- Confirm the enclosure and cooling method for the panel temperature
- Verify the protection set: over-current, over-voltage, thermal and short circuit
Specifications
|
聚乙脂膜－箔式电容器 CL11 Lamp Capacitor
![]()
特点与用途：
采用聚乙脂膜和铝箔双层绕制，引线为内焊接，属无极性，有感应式．具有体积小，重量轻，价格便宜等特点．广泛用于收音机，卫星接收机，通讯行业，电动玩具，电子发音设备和节能照明设备中． |
|
|
Item No. |
性能Characteristic |
|
额定电压
Rated Voltage |
100V,250V,400V,630V,1000V,1200V |
|
气候类别
Temperature |
-55℃～+85℃ |
|
容量范围
Volume Range |
0.001μF～0.22μF |
|
标称误差
Tolerance |
J(±5%) K(±10%) M(±20%) |
|
耐压
Resistant Pressure |
1.6Ur |
|
损耗
Loss |
DF≤1.0%(20℃ 1KHZ) |
|
绝缘电阻
Insulated Resistance |
C≤0.10μF IR≥30000MΩ C>0.1μF IR>10000MΩ/C |
Frequently asked questions about the CL11 Lamp Capacitor
How much headroom should I leave on the power rating?
For continuous industrial duty plan on 20-30 % headroom above the measured load. For loads with high inrush, such as motors or capacitive input, allow more and check the surge rating rather than only the average current.
Do these units accept 110 V and 230 V mains?
Input ranges are model-specific and shown in the specification table. Where a wide-range input is available it is stated; otherwise send your mains voltage and we will match the model.
What protection features are built in?
Typical protection covers short circuit, over-current, over-voltage and thermal shutdown. The exact set is listed per model in the specification table above.
Can you supply matching DIN-rail or enclosed versions?
Open-frame, enclosed and DIN-rail variants exist across this family. Send the model you are working from and we will confirm the equivalent mounting option.
Related Capacitor models
Further reading
