Tailed Bulb

About the Tailed Bulb

The Tailed Bulb is part of the ELEHPD Incandescent Bulb range. Item No.：TB-1005-Red Item No.：TB-1005-Frosted Item No.：TB-1006-Clear Item No.：TB-1006-2C Tailed Bulb NO. Type Voltage Power Base Colour Size TB1005 CAL35 5V - 260V 5W - 60W E14S/BA15D Clear,Frosted,Red,Blue,Yellow,Green 35x125mm TB1006 CAL32 5V - 260V 5W - 60W E26/E14S/E14/E12S/E12 CLEAR,FROSTED 32x115mm ELEHPD manufactures and exports low voltage electrical products from Yueqing, Zhejiang, China, supplying distributors, panel builders, M&E contractors and OEM buyers worldwide.

Typical applications

Commercial interiors: offices, retail, showrooms and hospitality
Industrial high-bay lighting for warehouses and workshops
Outdoor area, street and roadway lighting
Warehouse, logistics and cold-store facilities
Project lighting specified through M&E contractors

How to specify the right Incandescent Bulb

Work from the required lux level at the task plane, then the mounting height
Match beam angle to the space: narrow for high ceilings, wide for low uniform coverage
Check the IP and IK rating for the installation environment
Confirm colour temperature and CRI with the interior designer or specifier

Specifications


Item No.：TB-1005-Red	Item No.：TB-1005-Frosted


Item No.：TB-1006-Clear	Item No.：TB-1006-2C

Tailed Bulb

NO.	Type	Voltage	Power	Base	Colour	Size
TB1005	CAL35	5V - 260V	5W - 60W	E14S/BA15D	Clear,Frosted,Red,Blue,Yellow,Green	35x125mm
TB1006	CAL32	5V - 260V	5W - 60W	E26/E14S/E14/E12S/E12	CLEAR,FROSTED	32x115mm

Frequently asked questions about the Tailed Bulb

What colour temperature should I specify?

4000 K neutral white is the safe general choice for industrial and commercial interiors. 3000 K suits hospitality and retail where a warmer look is wanted. 5000-6500 K is common for outdoor and roadway lighting.

What IP rating do I need for outdoor use?

IP65 is the practical minimum for exposed outdoor fixtures. For wash-down or coastal locations, specify IP66 with a corrosion-resistant housing and confirm the IK impact rating.

Can the fixtures be dimmed or sensor-controlled?

Dimming and sensor variants depend on the driver fitted to the model. Tell us the control protocol you use (0-10 V, DALI, triac) and we will confirm compatible models.

Do you supply photometric data for lighting design?

IES/LDT photometric files can be supplied for project models so your designer can run the lighting calculation in DIALux or Relux.