About the Reed sensor magnetic switch CS1-S
The Reed sensor magnetic switch CS1-S is part of the ELEHPD Magnetic Sensor range. Reed sensor also called magnetic switch,reed sensor is applicable for position determination of pneumatic and/or hydraulic cylinder and piston pump.lt also can be usedslinit switch. When the magnetic object approaches, the reed closes and sends out switch signal through magnificatio. ELEHPD manufactures and exports low voltage electrical products from Yueqing, Zhejiang, China, supplying distributors, panel builders, M&E contractors and OEM buyers worldwide.
Typical applications
- Motor control centres and pump or fan starters
- Machine building, conveyors, packaging and CNC equipment
- HVAC control panels and building automation
- Water treatment, irrigation and pumping stations
- Panel retrofits replacing electromechanical control gear
How to specify the right Magnetic Sensor
- Size the contact rating for the inductive load, not just the resistive current (AC-3 duty for motors)
- Check the coil voltage and frequency available in the panel: 24 V DC, 110 V, 230 V or 400 V AC
- Confirm the auxiliary contact count needed for the control and indication circuit
- Match the enclosure rating to the environment (IP20 inside a panel, IP65 on the machine)
Specifications
reed sensor magnetic switch CS1-S
Reed sensor also called magnetic switch,reed sensor is applicable for position determination of pneumatic and/or hydraulic cylinder and piston pump.lt
also can be usedslinit switch. When the magnetic object approaches, the reed closes and sends out switch signal through magnificatio.
Compared with inductive sensor, it h tlie following strongpoints: can be installed in metal colsely and side by side and detect through met
al object. Its detection distance subjects to the intensity of magnetic field of detected object. Reed sensor is not applicable in the occasi
on of sevee vibration.
Model : CS1-S
Working voltage : DC5V-240V /AC5V-240V
Working current: DC 5-60mA / AC 5V-50mA
Response time : 1ms max
Cable length :2m
IP67
Frequently asked questions about the Reed sensor magnetic switch CS1-S
What is the difference between a contactor and a relay?
A contactor is built for switching power circuits repeatedly at high current, often with motor duty ratings (AC-3) and arc-suppressing chambers. A relay switches control signals at low current. In practice: contactor for the motor, relay in the control circuit that drives the contactor coil.
How do I calculate the correct contactor size for a motor?
Use the motor's full-load current, apply the AC-3 rating for the operating voltage, and allow for the number of starts per hour. As a rule of thumb, the contactor's AC-3 rating should be at least equal to the motor FLC, then step up one frame if the duty is heavy.
Do you supply the coil voltage I need?
Coil voltages are specified per order. Send the model number, coil voltage and frequency you require and we will confirm availability and lead time.
Are auxiliary contacts included?
Base models come with the standard auxiliary contact configuration for that frame. Add-on auxiliary blocks and mechanical interlocks can be quoted with the contactor.
Further reading
