Lighting Pendant

About the Lighting Pendant

The Lighting Pendant is part of the ELEHPD Lighting Accessory range. T22A Pre-Wired LH Insert T22B Ceramic LH Insert ELEHPD manufactures and exports low voltage electrical products from Yueqing, Zhejiang, China, supplying distributors, panel builders, M&E contractors and OEM buyers worldwide.

Typical applications

Commercial interiors: offices, retail, showrooms and hospitality
Industrial high-bay lighting for warehouses and workshops
Outdoor area, street and roadway lighting
Warehouse, logistics and cold-store facilities
Project lighting specified through M&E contractors

How to specify the right Lighting Accessory

Work from the required lux level at the task plane, then the mounting height
Match beam angle to the space: narrow for high ceilings, wide for low uniform coverage
Check the IP and IK rating for the installation environment
Confirm colour temperature and CRI with the interior designer or specifier

Specifications

W619
9"pendant set

W701
ceiling rose
W618
6"pendant set

W614
T2lh
W615
2A 250VT2 1PLH

W608
SWLH,10mmentry
W607
SWLH,1/2"entry

W601
batten LH,
W602
batten LH,HO skirt

W603
LH+loop-in base,
W604
LH+loop-in base, HO skirt

W605
45 angled LH,
W606
45 angled LH,HO skirt

W616
45 angled LH+base,
W617
45 angled LH+base,HO skirt

T22A Pre-Wired LH Insert
T22B Ceramic LH Insert

Screw-type
T23C Switched LH Insert
T23D Fast-fit LH Insert

T65 Aluminum Enclosure
T65D Brass plated D

T65E Chrome-plated E
T65H Antique Brass H
T65K Black Nickel Plated K

T651D
1/2" entry,
screwterminal
T652D
10mm entry,
screwterminal

T653D
1/2"+locking nut,
T654D
10mm+locking nut
T655D
1/2"entry,fast-fit T

T653D
10mm entry,
screw terminal
T657D
1/2"+locking nut,
fast-fit T
T658D
10mm+locking nut,

T659E, T659H, T660D
unswitched

Frequently asked questions about the Lighting Pendant

What colour temperature should I specify?

4000 K neutral white is the safe general choice for industrial and commercial interiors. 3000 K suits hospitality and retail where a warmer look is wanted. 5000-6500 K is common for outdoor and roadway lighting.

What IP rating do I need for outdoor use?

IP65 is the practical minimum for exposed outdoor fixtures. For wash-down or coastal locations, specify IP66 with a corrosion-resistant housing and confirm the IK impact rating.

Can the fixtures be dimmed or sensor-controlled?

Dimming and sensor variants depend on the driver fitted to the model. Tell us the control protocol you use (0-10 V, DALI, triac) and we will confirm compatible models.

Do you supply photometric data for lighting design?

IES/LDT photometric files can be supplied for project models so your designer can run the lighting calculation in DIALux or Relux.