Lampholder 002W 660W 250V

About the Lampholder 002W 660W 250V

The Lampholder 002W 660W 250V is part of the ELEHPD Lighting Accessory range. LDZ002W Lampholder Rating:660W 250V Description:One piece Terminals:4 Top Wire Screws Switch:keyless Color:white ELEHPD manufactures and exports low voltage electrical products from Yueqing, Zhejiang, China, supplying distributors, panel builders, M&E contractors and OEM buyers worldwide.

Typical applications

Commercial interiors: offices, retail, showrooms and hospitality
Industrial high-bay lighting for warehouses and workshops
Outdoor area, street and roadway lighting
Warehouse, logistics and cold-store facilities
Project lighting specified through M&E contractors

How to specify the right Lighting Accessory

Work from the required lux level at the task plane, then the mounting height
Match beam angle to the space: narrow for high ceilings, wide for low uniform coverage
Check the IP and IK rating for the installation environment
Confirm colour temperature and CRI with the interior designer or specifier

Specifications

LDZ002W Lampholder

    Rating:660W 250V
    Description:One piece
    Terminals:4 Top Wire Screws
    Switch:keyless
    Color:white

LDZ004W Lampholder

Rating:660W 250V

One piece/push wire/keyless

Molded of high-temperature, thermoset plastic to prevent discoloration and reduce breakage

Color: White

Frequently asked questions about the Lampholder 002W 660W 250V

What colour temperature should I specify?

4000 K neutral white is the safe general choice for industrial and commercial interiors. 3000 K suits hospitality and retail where a warmer look is wanted. 5000-6500 K is common for outdoor and roadway lighting.

What IP rating do I need for outdoor use?

IP65 is the practical minimum for exposed outdoor fixtures. For wash-down or coastal locations, specify IP66 with a corrosion-resistant housing and confirm the IK impact rating.

Can the fixtures be dimmed or sensor-controlled?

Dimming and sensor variants depend on the driver fitted to the model. Tell us the control protocol you use (0-10 V, DALI, triac) and we will confirm compatible models.

Do you supply photometric data for lighting design?

IES/LDT photometric files can be supplied for project models so your designer can run the lighting calculation in DIALux or Relux.