SA-PAR30 LED Spotlight

About the SA-PAR30 LED Spotlight

The SA-PAR30 LED Spotlight is part of the ELEHPD LED Spotlight range. SA-PAR30 LED Spotlight from the ELEHPD LED Spotlight range. ELEHPD manufactures and exports low voltage electrical products from Yueqing, Zhejiang, China, supplying distributors, panel builders, M&E contractors and OEM buyers worldwide.

Typical applications

Commercial interiors: offices, retail, showrooms and hospitality
Industrial high-bay lighting for warehouses and workshops
Outdoor area, street and roadway lighting
Warehouse, logistics and cold-store facilities
Project lighting specified through M&E contractors

How to specify the right LED Spotlight

Work from the required lux level at the task plane, then the mounting height
Match beam angle to the space: narrow for high ceilings, wide for low uniform coverage
Check the IP and IK rating for the installation environment
Confirm colour temperature and CRI with the interior designer or specifier

Specifications

Item No.: SA-PAR30 LED Spotlight

Voltage: AC 220V/110V/12V

Watt: 1.1W,1.7W,2.1W,2.7W,3.3W,4.4W

Color: Red,Blue,Green,White,Yellow,Purple,RGB,Warm White,

Fitting Base : E27,GU10,E14, PAR30

No.of LED: 20,30,40,60

Intesisty per LED: 2-2.5Kmcd,3-5Kmcd,7-9Kmcd,9-11Kmcd,10-12Kmcd,11-13Kmcd,13-15Kmcd,15-18Kmcd

Wave Length: 460-465nm,520-525nm,585-590nm,625-630nm,3000-3500K,6500K＋200

Life: 50000-80000 hour

Angle: 15°±2°,120°±2°

Frequently asked questions about the SA-PAR30 LED Spotlight

What colour temperature should I specify?

4000 K neutral white is the safe general choice for industrial and commercial interiors. 3000 K suits hospitality and retail where a warmer look is wanted. 5000-6500 K is common for outdoor and roadway lighting.

What IP rating do I need for outdoor use?

IP65 is the practical minimum for exposed outdoor fixtures. For wash-down or coastal locations, specify IP66 with a corrosion-resistant housing and confirm the IK impact rating.

Can the fixtures be dimmed or sensor-controlled?

Dimming and sensor variants depend on the driver fitted to the model. Tell us the control protocol you use (0-10 V, DALI, triac) and we will confirm compatible models.

Do you supply photometric data for lighting design?

IES/LDT photometric files can be supplied for project models so your designer can run the lighting calculation in DIALux or Relux.