About the Infra-red ray Lamps
The Infra-red ray Lamps is part of the ELEHPD Mercury Lamp range. Infra-red ray lamps Features: 1.these infrared ray lamps can be installed in small places because of their compact size and their high ELEHPD manufactures and exports low voltage electrical products from Yueqing, Zhejiang, China, supplying distributors, panel builders, M&E contractors and OEM buyers worldwide.
Typical applications
- Commercial interiors: offices, retail, showrooms and hospitality
- Industrial high-bay lighting for warehouses and workshops
- Outdoor area, street and roadway lighting
- Warehouse, logistics and cold-store facilities
- Project lighting specified through M&E contractors
How to specify the right Mercury Lamp
- Work from the required lux level at the task plane, then the mounting height
- Match beam angle to the space: narrow for high ceilings, wide for low uniform coverage
- Check the IP and IK rating for the installation environment
- Confirm colour temperature and CRI with the interior designer or specifier
Specifications
Features:
1.these infrared ray lamps can be installed in small places because of their compact size and their high efficiency is insured by a built-in vaporized aluminum reflector.
2.As heat radiation increases,it is a absorbed directly by the object materials with minimal loss and high speed.
3.A mechanical base is employed,instead of a conventional asbestos one,which increases mechanical strength as it reduces the possiblity of accidents due to a loose base of an electric shock.
4.The outer bulb is make of hard,heat-resistant glass which ensures satisfactory service in all weather conditiors.
5.because the gas in seated into bulbs with a special mechanism,a higher efficiency can be maintained and reflector detrioration can be eliminated.Thus,YAMAO infrared Ray lamps have longer life with less maintenance coats.
6.The replacement of lamps and cleaning can be performed easily and safety.
|
|
Wattage(w |
Type |
Bulb |
Base |
|
Initial Characteristics |
Colour Temperature
(k) |
Average life(h) |
Case qty |
Carton Meas(cm) |
|
|
Total Radiant Flax(w) |
Radiant Efficiency
(%) |
|
125 |
IR100/110V 125WRH |
R127 |
E27 |
188 |
80min |
65min |
2300 |
6000 |
30 |
62×38×39 |
5.0/2.5 |
|
125 |
IR220V 125WRH |
R127 |
E27 |
188 |
77min |
62min |
2250 |
6000 |
30 |
62×38×39 |
5.0/2.5 |
|
250 |
IR100/110V 125WRH |
R127 |
E27 |
188 |
175min |
70min |
2400 |
6000 |
30 |
62×38×39 |
5.0/2.5 |
|
250 |
IR220V 125WRH |
R127 |
E27 |
188 |
165min |
66min |
2350 |
6000 |
30 |
62×38×39 |
5.0/2.5 |
|
375 |
IR100/110V 125WRH |
R127 |
E27 |
188 |
270min |
72min |
2400 |
6000 |
30 |
62×38×39 |
5.0/2.5 |
|
375 |
IR220V 125WRH |
R127 |
E27 |
188 |
255min |
68min |
2400 |
6000 |
30 |
62×38×39 |
5.0/2.5 | |
Frequently asked questions about the Infra-red ray Lamps
What colour temperature should I specify?
4000 K neutral white is the safe general choice for industrial and commercial interiors. 3000 K suits hospitality and retail where a warmer look is wanted. 5000-6500 K is common for outdoor and roadway lighting.
What IP rating do I need for outdoor use?
IP65 is the practical minimum for exposed outdoor fixtures. For wash-down or coastal locations, specify IP66 with a corrosion-resistant housing and confirm the IK impact rating.
Can the fixtures be dimmed or sensor-controlled?
Dimming and sensor variants depend on the driver fitted to the model. Tell us the control protocol you use (0-10 V, DALI, triac) and we will confirm compatible models.
Do you supply photometric data for lighting design?
IES/LDT photometric files can be supplied for project models so your designer can run the lighting calculation in DIALux or Relux.
Related Mercury Lamp models
Further reading
