About the INDUCTIVE CYLINDER TYPE PROXIMITY SENSOR IM35
The INDUCTIVE CYLINDER TYPE PROXIMITY SENSOR IM35 is part of the ELEHPD Cylinder Inductive Type range. INDUCTIVE CYLINDER TYPE PROXIMITY SENSOR IM35 from the ELEHPD Cylinder Inductive Type range. ELEHPD manufactures and exports low voltage electrical products from Yueqing, Zhejiang, China, supplying distributors, panel builders, M&E contractors and OEM buyers worldwide.
Typical applications
- Control panel cooling and air circulation
- Filtered ventilation for dusty industrial areas
- Condensation prevention in outdoor cabinets
- Machine cooling in continuous-duty production
- Telecom and power cabinets
How to specify the right Cylinder Inductive Type
- Calculate the panel heat load in watts before selecting airflow
- Match the airflow to the required internal temperature rise
- Choose the filter class for the dust level on site
- Confirm the supply voltage and noise limit for the location
Specifications
INDUCTIVE CYLINDER TYPE PROXIMITY SENSOR IM35
| 外形尺寸
OVERALL DIMENSIONS | |
| | 检测距离 DETECTION DISTANCE |
| 埋
入
式
F
l
u
s
h | 直流
DC
10-
30
VDC 交流
AC
90-
250
VAC | NPN | NO | |
| NC | |
| NO+NC | |
| PNP | NO | |
| NC | |
| NO+NC | |
| 二线制
two wire
system | NO | |
| NC | |
| SCR
可控硅
Control-
lable
silicon | NO | |
| NC | |
| NO+NC | |
| 继电器输出Relay output | |
| | 检测距离 DETECTION DISTANCE 17mm |
| 非
埋
入
式
F
l
u
s
h | 直流
DC
10-
30
VDC 交流
AC
90-
250
VAC | NPN | NO | IM35-17-DNA |
| NC | IM35-17-DNB |
| NO+NC | IM35-17-DNC |
| PNP | NO | IM35-17-DPA |
| NC | IM35-17-DPB |
| NO+NC | IM35-17-DPC |
| 二线制
two wire
system | NO | IM35-17-DLA |
| NC | IM35-17-DLB |
| SCR
可控硅
Control-
lable
silicon | NO | IM35-17-ACA |
| NC | IM35-17-ACB |
| NO+NC | |
| 继电器输出Relay output | IM35-17-JC |
| 输出电流
Controloutput | DC | 200mA |
| SCR/继电器 Relay | |
| 输出电压降Output voltagc dropDC/AC | 直流(NPN PNP)型3V以下、二线型：3.9V以下、交流AC 10V以下 DC<3V、AC<10V |
| 消耗电流Consumption current | 直流(NPN PNP)型DC 12V时8mA、24V时15mA、交流AC 10mA以下DC<15mA、AC<10mA |
| 标准检测物体Standard detected object | 40X40X1(A3铁iron) |
| 重复精度Repeated precision | 0.1 |
| 响应频率DC/AC | 100Hz/15Hz |
| 工作环境温度Working environment temperature | -25℃～+75℃ |
| 绝缘电阻Insulation resistance | 50MΩ |
| 外壳材料Shell material | ABS树脂Resin |
| 防护等级Protection grade | IP67 |
| 可替代国内型号Altemative model at home and abroad | |
Frequently asked questions about the INDUCTIVE CYLINDER TYPE PROXIMITY SENSOR IM35
How do I size a panel fan?
Estimate the total heat dissipation inside the enclosure, decide the acceptable internal temperature rise, then select an airflow that removes that heat. As a first pass, 1 m3/min of airflow removes roughly 55 W for a 10 K rise at sea level.
Do I need a filter with the fan?
Anywhere with airborne dust, yes. The filter keeps conductive dust off the terminals and busbars; without it, the fan simply pushes contamination through the panel.
What voltage are the fans available in?
AC and DC options exist across the family. Confirm the voltage from the specification table or send your panel supply and we will match it.
Can these be used for condensation control?
For condensation you normally want an enclosure heater plus a thermostat or hygrostat rather than a fan alone. We can quote the heater and control together with the fan.
Further reading
