DL-2001 Down Light

About the DL-2001 Down Light

The DL-2001 Down Light is part of the ELEHPD Down Lights range. Material: Cold steel plate /Aluminum/AL alloy ELEHPD manufactures and exports low voltage electrical products from Yueqing, Zhejiang, China, supplying distributors, panel builders, M&E contractors and OEM buyers worldwide.

Typical applications

Commercial interiors: offices, retail, showrooms and hospitality
Industrial high-bay lighting for warehouses and workshops
Outdoor area, street and roadway lighting
Warehouse, logistics and cold-store facilities
Project lighting specified through M&E contractors

How to specify the right Down Lights

Work from the required lux level at the task plane, then the mounting height
Match beam angle to the space: narrow for high ceilings, wide for low uniform coverage
Check the IP and IK rating for the installation environment
Confirm colour temperature and CRI with the interior designer or specifier

Specifications

**Item No.:DL-2001 Down Lamp

Diameter: 75mm

Bore: 65mm

Lamp Holder: 方插灯头

Mode of Install:embedded

Lamp: MR11

Voltage: 220V/50Hz

Material: Cold steel plate /Aluminum/AL alloy

Loop shape: Evenly loop/ Oblique loop

Colour: White /Satin Nickel /Chrome /Bronze /Silver grey /Silver/K Gold

Item No.:DL-2004 Down Lamp

Diameter: 98mm

Bore: 80mm

Lamp Holder: 方插灯头

Mode of Install:embedded

Lamp: MR16

Voltage: 220V/50Hz

Material: Cold steel plate /Aluminum/AL alloy

Loop shape: Evenly loop/ Oblique loop

Colour: White /Satin Nickel /Chrome /Bronze /Silver grey /Silver/K Gold

Frequently asked questions about the DL-2001 Down Light

What colour temperature should I specify?

4000 K neutral white is the safe general choice for industrial and commercial interiors. 3000 K suits hospitality and retail where a warmer look is wanted. 5000-6500 K is common for outdoor and roadway lighting.

What IP rating do I need for outdoor use?

IP65 is the practical minimum for exposed outdoor fixtures. For wash-down or coastal locations, specify IP66 with a corrosion-resistant housing and confirm the IK impact rating.

Can the fixtures be dimmed or sensor-controlled?

Dimming and sensor variants depend on the driver fitted to the model. Tell us the control protocol you use (0-10 V, DALI, triac) and we will confirm compatible models.

Do you supply photometric data for lighting design?

IES/LDT photometric files can be supplied for project models so your designer can run the lighting calculation in DIALux or Relux.