Krod Electric
Lay Z
+8613868750251
hpd1000
ZN0223@GMAIL.COM
250W Switching power supply
Features :
• AC input range selectable by switch
• Protections:Short circuit/Over load
• Forced air cooling by built-in DC fan
• 100% full load burn-in test
• Fixed switching frequency at 60KHz
• Low cost
• High reliability
• 2 years warranty
SPECIFICATION
| Model | S-250-5 | S-250-12 | S-250-15 | S-250-24 | S-250-27 | S-250-48 | |
| Output | DC Voltage | 5V | 12V | 15V | 24V | 27V | 48V |
| Rated Current | 40A | 18A | 15A | 10A | 9A | 5.2A | |
| Current Range | 0~40A | 0~18A | 0~15A | 0~10A | 0 ~ 9A | 0 ~ 5.2A | |
| Rated Power | 200W | 216W | 225W | 240W | 243W | 249.6W | |
| Ripple & Noise (max.) Note.2 | 80mVp-p | 120mVp-p | 120mVp-p | 120mVp-p | 150mVp-p | 200mVp-p | |
| Voltage Adj. Range | 4.75~5.5V | 10.8~13.2V | 13.5~16.5V | 21.6~26.4V | 24.3~29.7V | 43.2~52.8V | |
| Voltage Tolerance Note.3 | ±2.0% | ±1.0% | ±1.0% | ±1.0% | ±1.0% | ±1.0% | |
| Line Regulation | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | |
| Load Regulation | ±1.0% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | |
| Setup,Rise time | 800ms, 50ms at full load | ||||||
| Hold time | 19ms at full load | ||||||
| Input | Voltage Range | 90 ~ 132VAC / 176 ~ 264VAC Selected by switch 248~370VDC | |||||
| Frequency Range | 47~63HZ | ||||||
| Efficiency(Typ.) | 74% | 79% | 80% | 81.5% | 82% | 82% | |
| AC Current(Typ.) | 4.8A/115VAC 2.8A/230VAC | ||||||
| Inrush Current (Typ.) | COLD START 45A/230VAC | ||||||
| Leakage Current | <2mA / 240VAC | ||||||
| Protection | Over Load | 105 ~ 150% rated output power | |||||
| Protection type : Hiccup mode, recovers automatically after fault condition is removed | |||||||
Over Voltage | 5.75 ~ 6.75V | 13.8 ~ 16.2V | 17.25 ~ 20.25V | 27.6 ~ 32.4V | |||
| Protection type : Hiccup mode, recovers automatically after fault condition is removed | |||||||
| Environment | Working Temperature | -10 ~ +60°c (Refer to "Derating Curve" ) | |||||
| Working Humidity | 20~90% RH Non-condensing | ||||||
| Storage temp.& humidity | -20~+85°C, 10~95%RH | ||||||
| Temp. coefficient | ±0.03%/°C (0~50°C) | ||||||
| Vibration | 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes | ||||||
Safety & EMC (Note 4.) | Safety Standards | UL60950-1 approved | |||||
| Withstand Voltage | I/P-O/P:1.5KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC | ||||||
| Isolation Resistance | I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC/ 25°c / 70% RH | ||||||
| Others | MTBF | 271.9K hrs min. MIL-HDBK-217F (25°c ) | |||||
| Dimension | 215*115*50mm (L*W*H) | ||||||
| Packing | 0.95Kg; 12pcs/12Kg/0.92CUFT | ||||||